Filter
Top Products
EN Advanced receive fax features and settings 97
Setting error correction
Normally, the product monitors the signals on the telephone line while
it is sending or receiving a fax. If the product detects an error signal
during the transmission and the Error Correction setting is on, the
product can request that a portion of the fax be resent.
The factory default for this setting is On. Only change it to Off if you
are having trouble sending or receiving a fax and want to accept the
errors in the transmission. Turning the setting off might be useful
when you are trying to send or receive a fax overseas or using a
satellite telephone connection.
To set error correction
1 Press ENTER/MENU.
2 Use the < or > key to select
FAX SETUP and then press ENTER/
M
ENU.
3 Use the < or > key to select
ALL FAXES and then press ENTER/
M
ENU.
4 Use the < or > key to select
ERROR CORRECTION and then press
E
NTER/MENU.
5 Use the < or > key to select
ON or OFF and then press ENTER/
M
ENU to save your selection.