Filter
Top Products
Chapter 4
Removal and Replacement
Removing and Replacing a PCI Power Module (Brick)
78
Removing a PCI Power Module (Brick)
Figure 4-17 PCI Power Module Detail
Step 1. Securely grasp the handle on the front of the power module.
Step 2. Firmly depress the securing thumb latch.
Step 3. Slide the module from the chassis.
Replacing a PCI Power Module (Brick)
Step 1. Carefully position the power module in the chassis and depress the thumb latch.
Step 2. The module easily slides into the chassis; however, a slow firm pressure will be needed to properly
seat the connection.
Step 3. Release the thumb latch.
NOTE PCI power module LED should show power module is operational and the green LED
should be on.