HP (Hewlett-Packard) HP RP7405/7410 Network Card User Manual


 
Chapter 2
Installation
MP Core I/O Connections
37
Setting Up the CE Tool (PC)
The CE Tool is usually a laptop. It allows communication with the Management Processor (MP) in the hp
rp7405/rp7410. The MP monitors the activity of either a one partition or a multiple partition configuration.
During installation, communicating with the MP enables such tasks as:
Verifying that the components are present and installed correctly
Setting LAN IP addresses
Shutting down cell board power
Communication with the MP is established by connecting the CE Tool to the Local RS-232 port on the MP
Core I/O card.
Setting CE Tool Parameters
After powering on the CE Tool, ensure the communications settings are as follows:
8/none (parity)
9600 baud
na (Receive)
•na (Transmit)