Filter
Top Products
Chapter 4
Removal and Replacement
Removing and Replacing a CD/DVD Drive
68
Replacing a CD/DVD
Figure 4-7 CD/DVD Detail
Step 1. Connect the cables to the rear of the CD/DVD.
Step 2. Slide the drive in the chassis.
CAUTION Before attempting to install the drive into the chassis, position the data cable over
the top of the drive in order to avoid pinching the cable during installation.
Step 3. The drive easily slides into the chassis; however, a slow firm pressure is needed to properly seat the
drive.
Step 4. Depress the front locking latch to secure the disk drive in the chassis.