Filter
Top Products
22 hp media center pc user’s guide
Wall to Cable TV Set-top Box or Satellite Box to
VCR to TV Using Coaxial Cable
Remove the coaxial cable at the input to the VCR,
and connect it to the input of a coaxial cable signal
splitter (not included; available at electronics stores).
Connect two coaxial cables to the splitter outputs.
Connect one of these cables to the input of the VCR
and the other one to the TV connector on the back of
the PC. Be sure to connect the remote sensor control
cable (emitter) and position it on your set-top box or
satellite box. This allows the PC to change the
channel on the box. See “Connecting the Remote
Sensor” on page 17.
Not shown in diagram: To view your images from
your TV, use an S-video In or a composite video In
cable to connect the TV to the PC. To view your
images from your monitor, use a monitor cable to
connect the fast forward to the PC.