Filter
Top Products
Vertical Rectangle
Size (PCL Units)
This command specifies the vertical rectangle size in PCL
Units.
? * c # B
# = number of PCL Units (valid to 4 decimal
places).
The vertical rectangle size is clipped to the bounds of the
logical page. Values greater than the logical page boundary
are acceptable; however, the final output is limited to the
printable area of the logical page. Values outside the range
of 0 - 32767 are ignored.
The default rectangle size is 0. Power-up and reset return
this value to the default.
Vertical Rectangle
Size (Decipoints)
This command specifies the vertical rectangle size in
decipoints.
? * c # V
# = number of decipoints (valid to 4 decimal
places).
The vertical rectangle size is clipped to the bounds of the
logical page. Values greater than the logical page boundary
are acceptable; however, the final output is limited to the
printable area of the logical page. Values outside the range
of 0 - 32767 are ignored.
Decipoints are converted into printer dot values, and any
fraction of a dot is rounded up to the next full printable dot.
The default rectangle size is 0. Power-up and reset return
this value to the default.
5-46 The PCL Print Model5-46 The PCL Print Model