Filter
Top Products
Fill Rectangular
Area
The Fill Rectangular Area command determines the type of
pattern used to fill the rectangle.
? * c # P
# = 0 - Solid black or foreground color
1 - Solid white fill
2 - Shaded fill
3 - Cross-hatch fill
4 - User-defined pattern fill
5 - Current pattern fill
Default = 0
Range = 0 - 5 (out-of-range values are ignored)
Note If a foreground color is selected, solid, shaded, and
cross-hatch patterns are printed in the foreground color.
User-defined patterns are not affected by the foreground
color, but can contain color if they are defined as such.
Solid white fills are not affected by foreground color.
Black fill—fills the rectangular area with black fill or with
the current foreground color.
White fill—erases any fill in the rectangular area (it fills
the rectangular area with white fill). Pertaining to white
fills, the pattern transparency mode is always “opaque”
(that is, the white pixels always have an effect on the
destination).
Shaded fill—fills the rectangular area with one of eight
shading patterns as specified by the Pattern ID command.
Cross-Hatch fill—fills the rectangular area with one of
the six cross-hatched patterns as specified by the Pattern
ID command.
User-defined fill—fills the rectangular area with custom
pattern data as specified by the Pattern ID command and
downloaded by the User-Defined Pattern command.
Current Pattern—fills the rectangular area with the
current pattern.
The PCL Print Model 5-47The PCL Print Model 5-47