Filter
Top Products
Raster Y Offset
Command
The Raster Y Offset command moves the cursor position
vertically the specified number of raster lines from the
current raster position in the raster area.
? * b # Y
# = Number of raster lines of vertical move-
ment
Default = N/A
Range = 0 - 32767
This command is recognized only while in raster graphics
mode and only within the raster area.
This command zero-fills the offset area. For color printers,
zero-fills are filled with the color of index 0, which is not
necessarily white.
For Delta Row compression (methods 3 and 9), this
command zeros the seed row. For Adaptive compression
(method 5), this command applies to the entire raster data
block.
Note Movement by this command is based upon the Raster
Resolution setting (?*t#R) and also the printer’s resolution
setting (75, 150, or 300 dpi).
Raster Graphics 6-19Raster Graphics 6-19