Filter
Top Products
Raster Graphics
Resolution
Command
Raster graphics can be printed at various resolutions. This
command designates the resolution of subsequent raster
data transfers in dots per inch.
? * t # R
# = 75 - 75 dots-per-inch
100 - 100 dots-per-inch
200 - 200 dots-per-inch
150 - 150 dots-per-inch
300 - 300 dots-per-inch
Default = 75
Range = 75, 100, 150, 200, 300
This command must be sent prior to the start graphics
command. The factory default resolution is 75 dots-per-inch.
Note Lower resolution graphics occupy less user memory. For
example, the number of bits required to represent a
two-inch by three-inch image at 75 dots-per-inch is 33,750.
The same image at 300 dots-per-inch requires 540,000 bits.
Raster Graphics 6-7Raster Graphics 6-7