Filter
Top Products
Destination Raster
Width
The Destination Raster Width command defines the width
in decipoints of the destination raster picture denoted by
the next Start Raster command, which must have a value
field of 2 or 3 (?*r2A or ?*r3A).
? * t # H
# = Width (in decipoints)
Default = Right logical page boundary minus
left graphics margin
Range = 0 – 32767 (values outside the range
are ignored)
Zero or absent values default the destination width to a
value that preserves isotropic scaling.
A specified width that would cross the right physical page
boundary is clipped at the right physical page boundary, but
the scale factor is maintained.
Destination Raster
Height
The Destination Raster Height command defines the height
in decipoints of the destination raster picture denoted by
the next Start Raster command, which must have a value
field of 2 or 3 (?*r2A or ?*r3A).
? * t # V
# = Height (in decipoints)
Default = Bottom logical page boundary
minus vertical CAP
Range = 0 – 32767 (values outside the range
are ignored)
Zero or absent values default the destination height to a
value that preserves isotropic scaling.
A specified height that is longer than the physical page is
clipped at the bottom of the physical page, but the scale
factor is maintained.
Raster Graphics 6-41Raster Graphics 6-41