Filter
Top Products
Select Color Map This value specifies which color treatment mode to use for
rendering the next job.
No Adjustment
This setting provides linearization only (that is, the user
sees the device as a linear device).
Process Blue
This setting provides the same results as Vivid Graphics
(linearization plus user-preferred enhancements) with the
addition of mapping process blue, which looks slightly
purple, to a blue closer to that of a standard monitor.
Vivid Graphics
This setting adds color saturation to the resulting image.
Transparency
This setting uses a map to render the best color output on
transmissive media.
Out of Gamut
This setting prints colors in an image that are out of
gamut—all colors that are in gamut snap to white, all
out-of-gamut colors are snapped to the gamut surface. This
setting only supports the device-independent color map.
CIE L*a*b* Match
This map performs a true color match to the requested
CIE L*a*b* input (there are no appearance matching
adjustments). This setting only supports the device-
independent color map.
Note For screen matching, the long form of the Configure Image
Data command is used and the color maps are generated
internally dependent upon the monitor calibration data (the
Driver Configuration command is not needed).
Modifying Output Color 4-21Modifying Output Color 4-21