Filter
Top Products
Removal and Replacement
Procedures
Removal and Replacement of Components 101
PCI or PCI-X
NOTE: The following illustration shows a PCI card being removed from a PCI slot. A PCI-X card is
removed from a PCI-X slot.
To remove a PCI or PCI-X card:
1. Disconnect power from the system (page 79), remove the access panel (page 86) and remove the PCI
card support (page 98), if installed.
2. Lift the PCI levers
1 by first pressing down and then up.
3. Lift the PCI card
2 out of the chassis. Store the card in an anti-static bag.
4. Install a PCI slot cover and close the PCI levers. If the PCI levers do not close, be sure all cards are
properly seated and then try again.