Filter
Top Products
Removal and Replacement
Procedures
Removal and Replacement of Components 87
Front Bezel
To remove the front bezel:
1. Disconnect power from the system (page 79) and open the access panel (page 86).
2. Lift up on the three tabs
1 located on the front bezel.
3. Rotate the front bezel away
2 from the chassis and remove the bezel.
To replace the front bezel, reverse the previous steps.
Bezel Blanks
To remove the bezel blank:
1. Disconnect power from the system (page 79), open the access panel (page 86), and remove the front
bezel (page 87).
2. Remove the bezel blank by pushing in on the tabs
1 and pushing the bezel blank out 2.
To replace the bezel blank, push in on the tabs and push the bezel blank into the bezel.