Filter
Top Products
Removal and Replacement
Procedures
Removal and Replacement of Components 109
Diskette Drive
To remove a diskette drive:
1. Disconnect power from the system (page 79), remove the access panel (page 86), and remove the
front bezel (page 87).
2. Disconnect the data
1 and power 2 cables from the back of the diskette drive.
3. While lifting the green drivelock release tab
1, slide the drive forward 2 out of the chassis.
4. Remove the diskette drive by removing the two M3 screws
1 in the rearmost holes and sliding the
diskette drive
2 from the bracket.