Filter
Top Products
Removal and Replacement Procedures74
Service Considerations
The following sections discuss service considerations that should be reviewed and practiced before
removing and replacing any system components.
WARNING! When lifting or moving the workstation, do not use the front bezel as a handle or lifting
point. Lifting the workstation from the front bezel or lifting it incorrectly can cause the unit to fall and harm
the user and damage the workstation. To properly and safely lift the workstation, lift it from the bottom of
the unit.
• “Cautions, Warnings, and Safety Precautions” on page 74
• “Electrostatic Discharge Information” on page 75
• “Tools and Software Requirements” on page 77
• “Special Handling of Components” on page 77
Cautions, Warnings, and Safety Precautions
For your safety, you must review the “Important Safety Warnings” on page 10 before accessing the
components of the workstation. Also, review the Safety and Regulatory Guide that came with your
workstation for more information.
WARNING! Avoid Burn Injuries. Some parts inside the computer will be hot. Turn off and unplug the
system, then wait approximately three to five minutes for them to cool down before opening the system
access panels or touching internal components.