Filter
Top Products
System Management52
Processors Enable/disable Processor Cache and Coherent HT Speed*.
NOTE: You can set the Hyper Transport Speed between the CPUs to one of the
following values: 200, 400, 600, 1000, and Auto.
*This option is only available on systems with two processors.
Chipset/
Memory
Enable/disable ECC support, Memory scrubbing, Memory remapping, and PCI SERR#
generation.
Onboard
Devices
Enables you to set resources for or disable onboard system devices (serial ports, USB
ports, diskette controllers, and so on).
Device
Options
Allows you to enable/disable:
• SATA Option ROM
• SATA RAID
• When SATA RAID is enabled, the following items are displayed:
SATA PORT # to 0 RAID
You must enable the port before using RAID.
SATA PORT # to 1 RAID
You must enable the port before using RAID.
SATA PORT # to 2 RAID
You must enable the port before using RAID.
SATA PORT # to 3 RAID
You must enable the port before using RAID.
• SCSI Option ROM
• Network Controller Option
Thermal Enable/disable full speed chassis fans.
PCI VGA
Configuration
NVIDIA VGA controller*
Specifies if controller is Primary VGA device/Non-boot device.
NVIDIA VGA controller**
Specifies if controller is Primary VGA device/Non-boot device.
* This controller refers to slot 1.
**This controller refers to slot 3, which is only available in a system with two graphics
cards.
Slot 1 (PCI
Express x 16)
Configures the option ROM.
Slot 2 (PCI) Configures the option ROM and latency timer.
Slot 3 (PCI
Express x 16)
Configures the option ROM.
Slot 4 (PCI-X
100)
Configures the option ROM and latency timer.
Slot 5 (PCI-X
100)
Configures the option ROM and latency timer.
Table 3-11 Computer Setup Menu Descriptions (continued)
Heading Option Description