Filter
Top Products
Table 25. Status byte 12 (continued)
Bit Description
7 (MSB) Reserved
Status byte 13
The printer can detect problems with the cards and might be able to communicate.
If it can communicate, these are the statuses that are sent. If the failure is such that
the printer cannot print, offline status will be set, and the CR LED will blip.
Table 26. Status byte 13
Bit Description
0 (LSB) Main logic card - CRU failure
1 Interface logic card - CRU failure
2 Thermal print head - CRU failure
3 Impact print head failure (not a CRU)
4 Reserved (Always = '0')
5 Motion sensor failure (not a CRU)
6 Reserved
7 (MSB) Reserved
Status byte 14
Table 27. Status byte 14
Bit Description
0 (LSB)
1
2
3
4 Reserved (Always = '0')
5 Problem communicating with the thermal print head
6 Executing offline test via command or keys
7 (MSB) Printing EJ data
Status byte 15
Table 28. Status byte 15
Bit Description
0 (LSB)
1
2
3
4
5
6
94 SureMark 4610 Printers : Programming Guide for Models 1xR and 2xR
|
|
|
||
||
||
||
||
||
||
||
||
|
|
|
|
||
||
||
||
||
||
||
||