Filter
Top Products
Re-initialize the printer
Syntax:
ESC @ or X'1B40'
Purpose:
Re-initialize all printer setting to their default values and reset the impact
print head.
Remarks:
Commands in the print buffer are not lost when this command is issued.
The settings that are re-initialized follow (all numbers are in hex):
Setting Default Value
Print Mode 00
Print Station Selected 02
User-Defined/Resident Character Sets 00
Code Page 01
Intercharacter Spacing (Single Byte) 03
Intercharacter Spacing (Double Byte) 06
Rotated Characters 00
Station for line spacing 02
Line Spacing (all stations) Six LPI
Tab Positions every 100 dots
Left Margin (all stations) 00
Relative Position 00
Align Positions 00
Unidirectional printing 00
Horizontal Size of Bar Code 03
Vertical Size of Bar Code A2
Position of HR 00
Font for HRI 00
Right Margin (all stations) 00
Error Recovery Color 00
Error Conditions:
None
Enable or disable the beeper
Syntax:
ESC BEL n1 n2 or X'1B 07 n1 n2'
where:
n1 Enables or disables beeper.
X'00' Disable beeper.
X'01'–X'FE'
Timed enable beeper.
X'FF' Enable beeper.
n2 Sets the beeper volume and tone.
Bits 0–3
The note. Bit 0 is the LSB.
Bits 4–5
The octave.
Chapter 2. Communication parameters 51