Filter
Top Products
Firmware offline tests (Models 1xR)
To enter the firmware offline test and setup procedures for Models 1xR, complete
the following steps:
The following sections describe the steps to enter the firmware offline test and
setup procedures for Model 1xR.
1. Open the top cover.
2. Press the white power reset switch (A in Figure 6) to turn the printer off and
then on again.
3. Close the top cover
4. While the printer is powering up, press and hold the paper feed button until
the front LED indicator blinks. The offline test is printed (see Figure 7 on page
108).
A
Figure 6. Offline tests activation
Chapter 7. Tests and diagnostics 107