Filter
Top Products
Chapter 2. Communication parameters
RS-232 serial parameter...........6
RS-232 commands summary by function .....6
Alphabetized commands summary ......10
System commands ............13
Verify previous commands completed ....13
Status request ............13
Reset printer .............13
EC/Request/Real-time status request.....14
Retrieve Native Mode Status (when printer is in
compatibility mode) ..........14
Retrieve Native Mode Device ID (when printer is
in compatibility mode) .........14
Extended address command-request printer ID 15
Printer ID format ...........15
Emulation mode for Model 1xR / 2xR .....16
Emulation of Non-IBM printers........17
Preset or onetime-set commands .......18
Memory allocation ...........18
Double-byte characters .........20
Download graphics (logo) commands ....20
Predefine messages ...........22
Download user-defined characters......23
Thermal code page ..........24
Proportional font ..........25
Impact code page ..........27
User-defined code page mapping ......28
Request checksum of flash memory sector . . . 29
Retrieve checksum of each downloaded logo or
each stored message ..........29
Flash storage write ...........30
Erase flash sector ...........30
Microcode tolerance (MCT) information - loading 31
Microcode tolerance (MCT) information - request 31
Setup commands ............35
Set print mode ............35
Set or cancel double-wide mode ......37
Set or cancel double-high mode ......37
Set or cancel underline mode .......38
Set or cancel overline mode ........38
Set or cancel invert mode.........38
Set or cancel emphasized printing ......38
Select maximum print speed........39
Set or cancel unidirectional printing .....39
Set document length for landscape print....39
Request document length for landscape print . . 40
Set print station ............40
Select user-defined or resident character sets . . 41
Set code page.............41
Set intercharacter spacing for single byte
character sets .............42
Set intercharacter spacing for double byte
character sets .............42
Set or cancel rotated characters .......43
Set print station parameters ........43
Select 1/8-inch line spacing ........43
Select 1/6-inch line spacing ........44
Select color printing ..........44
Set line spacing using minimum units ....45
Set sheet eject length ..........45
Set horizontal tab positions ........46
Set left margin position .........46
Set right margin position .........47
Set relative position...........47
Set low paper calibration .........48
Align positions ............48
Set error recovery function ........49
Define document wait time ........49
Status sent to system ..........50
Select character for reprinted lines ......50
Re-initialize the printer .........51
Enable or disable the beeper........51
Enable or disable the feed buttons .....52
Enable or disable upside-down printing ....52
Select character size for scalable fonts ....53
Fix font matrix ............54
Print logo inline ............54
Set or cancel strike-through ........55
Select thermal paper ..........55
Bar code commands ...........56
Print bar code ............56
Print bar code examples ........61
Select horizontal size of bar code ......61
Select bar code height ..........61
Select printing position of human readable
information (HRI) ...........61
Select font for HRI ...........62
Print PDF417 bar code..........62
Select PDF417 ECC (error correction codewords)
level................63
Select aspect ratio PDF417 bar code .....63
Enable PDF417 truncation ........64
Print character commands .........64
Print and line feed ...........64
Print and line feed ...........64
Print, form feed, and cut the paper (FF) ....64
Print and feed paper n lines ........65
Print and feed paper using minimum units. . . 65
Print graphic messages ..........65
Select and print a graphics (logo) command . . 65
Print predefined graphics (logo) command . . . 67
Enable watermark printing ........68
Print predefined messages ........68
Check processing commands - 2CR only ....69
MICR read .............69
Flip check ..............71
Miscellaneous commands..........71
Horizontal tab ............71
Backspace for composite characters .....71
Return home (select print head location)....72
Paper cut/DI eject ...........73
Generate drive pulse for cash drawer.....73
Retrieve the flash storage .........73
© Copyright IBM Corp. 2008, 2011 5
|
||
|
||
||