Filter
Top Products
v The logo is 24 dot rows high. If printed in double-high mode, the logo
will be 48 rows high.
v The number of data bytes to form the image is figured by
{((n1×256+n2)−1)/8+1}×24.
v Like user-defined characters, if the image is only 14 dots wide, the last
two dots should be zero to complete the byte. When printed, the image
will be only 14 dots wide.
Set or cancel strike-through
Syntax:
ESC; sn or X'1B73;n'
Where:
n=00 Cancel strike-through mode.
n=01 Set strike-through mode.
Default:
n=00
Remarks:
This is only valid in the Cash Receipt Station.
Select thermal paper
Syntax:
GS; n or X'1D3B;n'
Where:
n = X'00'
Disable two-color printing.
n = X'01'
Enable color printing using print parameter set 1.
n = X'02'
Enable color printing using print parameter set 2.
n = X'03'
Enable color printing using print parameter set 3.
X'n = 04'–X'FF'
Select the print parameters to be defined.
Purpose:
To enable two-color printing and select the print parameters that are best
suited for the paper selected.
Remarks:
v New parameters will be defined as new color papers become available.
v The speed of printing will change depending on the print parameters.
When print parameter set 1 is used, the print speed will be 15 lines per
second.
v This command setting is saved in nonvolatile memory.
Chapter 2. Communication parameters 55