Filter
Top Products
If this number plus the left margin exceeds the printable area it is ignored.
See “Set left margin position” on page 46.
In the customer receipt station, this number is rounded back to a factor of
8.
Set low paper calibration
Syntax:
GSc2orX'1D63;32'
Purpose:
You must calibrate the printer to accurately recognize the thickness of the
paper supply. Calibration can be done using an offline test (see “Summary
of the offline test menus (Models 1xR)” on page 108) or using the above
command.
Default:
11meter = 0x2AF8.
Note: See “Low paper sensing and calibration” on page 101
Align positions
Syntax:
ESC a n or X'1B61;n'
Where:
n=00 Align Left
n=01 Align Center
n=02 Align Right
n=04 Align Column Right
Default:
n=00
Remarks:
v Values 00, 01, and 02 are only valid at the beginning of a line.
v Tabs are only valid when printing is aligned to the left. If tabs are used
when left alignment is not used, results can be unpredictable. (See
“Horizontal tab” on page 71.)
v Alignment is relative to the left margin.
v To use the Align Column Right command:
1. Send the characters that you want to be left aligned.
2. Send the Align Column Right command.
3. Send the characters that you want to be right aligned.
4. Send an end of line command, for example X'0A' or X'0D'.
The printer will return to left aligned after the line is printed.
Limitations for n=04:
v The command is only valid in the cash receipt station.
v The command is ignored if the printer is not left aligned when the
command is received.
48 SureMark 4610 Printers : Programming Guide for Models 1xR and 2xR