Filter
Top Products
Installing and Removing the Internal CD-ROM Drive
The Dock I can accommodate one internal CD-ROM drive.
This section describes the procedures for installing and removing
the internal CD-ROM drive.
CAUTION:
1. This CD-ROM drive uses a laser system. To ensure correct
use of this product, read the manual that came with the
CD-ROM drive carefully and keep the manual for future
reference. Should the unit ever require maintenance, contact
an authorized service location.
2. Use of controls, adjustments or the performance of procedure
other than those specified may result in hazardous radiation
exposure.
3. To prevent direct exposure to the laser beam, do not open the
enclosure.
Installing the Internal CD-ROM Drive
To install the CD-ROM drive in the Dock I, do the following:
1.
Remove the bottom cover.
See “Removing the Bottom Cover” on page 4-3.
2.
If you have installed an adapter
card, remove it.
See “Removing the Adapter Card” on page 4-23.
3.
If the blank bezel is installed,
remove it.
See “Removing the Blank Bezel” on page 4-8.
Chapter 4. Installing and Removing IBM Options 4-11
Title: C74AMST CreationDate: 06/23/93 17:09:07