Filter
Top Products
Installing and Removing the ThinkPad Hard Disk Drive
The Dock I can accommodate one ThinkPad hard disk drive.
This section describes the procedures for installing and removing
the ThinkPad hard disk drive.
Installing the ThinkPad Hard Disk Drive
To install the ThinkPad hard disk drive in the Dock I, do the
following:
1.
Remove the bottom cover.
See “Removing the Bottom Cover” on page 4-3.
2.
If you have installed an adapter
card, remove it.
See “Removing the Adapter Card” on page 4-23.
3.
If the blank bezel is installed,
remove it.
See “Removing the Blank Bezel” on page 4-8.
4.
Attach the ThinkPad hard disk
drive to the optional HDD
Installation Kit.
Refer to the manual that came with the option.
Chapter 4. Installing and Removing IBM Options 4-17
Title: C74AMST CreationDate: 06/23/93 17:09:07