For future reference, if you select an interrupt, record it here.
IRQ No.:
SCSI ID
Important
Ensure that no more than 5 SCSI devices (internal or
external) are attached to the Dock I SCSI controller.
Ensure that no more than 3 meters (approximately 10 feet)
total maximum of cable length are used.
There are eight SCSI IDs—7 through 0. SCSI ID 7 is reserved
exclusively for the SCSI controller. Each device must have a unique
SCSI ID. You can set your devices—a maximum of 5—to any of the
other available SCSI IDs.
Due to the method by which the SCSI controller services option
devices, follow the guidelines below for establishing device SCSI
IDs:
If you are installing:
IBM 3.5-inch SCSI Rewritable Optical Disk Drive, or
IBM 5.25-inch SCSI Rewritable Optical Disk Drive
use a lower SCSI ID than used for your hard disk drives.
If you are installing an IBM PS/2 CD-ROM drive (external), use
a lower SCSI ID than used for your hard disk drives and the
above rewritable optical disk drives.
An example of the recommended SCSI ID assignments is shown
below.
5-6 IBM ThinkPad Dock I User’s Guide
Title: C74AMST CreationDate: 06/23/93 17:09:07