Filter
Top Products
FLJB_WDD_BASE_ESDS_RBA
4-byte relative byte address of record in base data set for ESDS (0 if file
does not refer to ESDS, or if it is an extended addressing ESDS).
FLJB_WDD_BASE_KEY_LENGTH
2-byte base key length. (The key length is 4 for an RRDS, a VRRDS, or a
standard ESDS; 8 for an extended addressing ESDS.)
FLJB_WDD_PATH_KEY_LENGTH
2-byte path key length (0 if file does not refer to a path).
FLJB_WDD_BITS
1-byte flag field:
X’80’ UOW has been shunted at least once
X’40’ Fixed-length record
Reserved
3-byte reserved field.
File-close record types
There are two sections in the journal records written for file-close record types:
v The FLJB_GENERAL_DATA section
v The FLJB_CLOSE_DATA section.
The format of such a record written for file-close record types is shown in Figure 83
on page 723.
242
FLJB_WDD_BITS
Pathkeylength
(0iffiledoesnotrefertoapath)
FLJB_WDD_PATH_KEY_LENGTH
Basekeylength
FLJB_WDD_BASE_KEY_LENGTH
FLJB_WDD_BASE_ESDS_RBA
Relativebyteaddressof
recordinbasedatasetforESDS
(0iffiledoesnotrefertoESDSor
isextendedESDS)
Flagbyte
X'80'UOWhasbeenshuntedatleastonce
X'40'fixedlengthrecord
1
3
Fixedlength
Reserved
Figure 82. Format of the FLJB_WRITE_DELETE_DATA section
722 Customization Guide