Filter
Top Products
Jumpers Intel® Server Board SDS2
Revision 1.2
Order Number: A85874-002
88
CN Numbers Qty Manufacturer Mfg. Part # Functional Description
25 1 FOXCONN MH11061-PD2 25-pin DSUB parallel port connector
22 1 FOXCONN DT10121-P5T DB9 serial port connector
33 1 FOXCONN HL07051-P5 10-pin serial port header
19 1 FOXCONN UB1112C-M1 3-pole USB connector
18 1 FOXCONN HL07051-P9 10-pin USB header
17 1 FOXCONN MH11061-PD2 Dual PS/2 keyboard / mouse connector
50 1 AMP 171825-2 2-pin chassis intrusion connector
1 1 MOLEX 39-28-1243 2x12-Pin ATX12 main power connector
10 1 MOLEX 39-28-1083 2x4-pin +12 V power connector
BT1 1 FOXCONN BB10209-A5 Battery holder
40, 41 2 FOXCONN HF55040 4-pin HSBP connector
39 1 MOLEX 22-03-5035 3-pin OEM IPMB connector
47 1 FOXCONN HB11021 2-pin BMC firmware write protect header
46 1 FOXCONN HB11021 2-pin BIOS write protect header
48 1 FOXCONN HB11021 2-pin BMC FRB timer disable header
49 1 FOXCONN HB11021 2-pin BMC FRC update header
5 1 SPEED TECH*
H111-1180-031 3-pin BMC SRAM header
8 1 FOXCONN HB11031 3-pin CPU ITP TDO header
2, 20, 21, 29, 36, 38 6 FOXCONN HF08030-P1 3-pin fan connector
44 1 AMP 640456-4 4-pin drive activity connector
6 1 MOLEX 70541-0004 5-pin AUX power connector
59 1 SPEED TECH H112-1180-121 2x6-pin processor speed ratio header
37 1 SPEED TECH H112-1180-121 2x17-pin front panel connector
42 1 FOXCONN HC11051 2x5-pin system configuration setting header
J2 1 MOLEX 5-pin ICMB connector
23 1 1x8-pin cPLD Programming Header
9. Jumpers
9.1 System Configuration Jumpers
This section describes jumper options on the Server Board.
Jumper headers provide various configuration options, as shown in the figure below. All jumper
headers except the Chassis Intrusion header (CN50) are located near the front of the board,
between the coin-cell battery socket and the IDE connector. The Chassis Intrusion header is
located near the back corner of the board, next to the PCI Slot 6 connector.