Intel SDS2 Server User Manual


 
BIOS Intel® Server Board SDS2
Revision 1.2
Order Number: A85874-002
66
Table 49. Hard Drive Selections
Option Description
Drive #1 (or actual drive
string)
Other bootable cards
Additional entries for each
drive that has a PnP header
To select the boot drive, use the up and down arrows to highlight a device,
then press the plus key (+) to move it to the top of the list or the minus key ()
to move it down.
Other bootable cards cover all the boot devices that are not reported to the
system BIOS through BIOS Boot specification mechanism. It may or may not
be bootable, and may not correspond to any device. If BIOS boot spec.
support is set to limited, this item covers all drives that are controlled by
option ROMs (like SCSI drives).
Press ESC to exit this menu.
Table 50. Removable Drive Selections
Feature Option Description
Lists Bootable Removable Devices in the
System
+
Use +/ keys to place the removable devices in the
boot order you want. Includes Legacy 1.44 MB floppy,
120 MB floppy etc.
6.3.2.3.6 Exit Menu Selections
The following menu options are available on the Exit menu. Use the up and down arrow keys to
select an option, and then press the Enter key to execute the option.
Table 51. Exit Menu Selections
Option Description
Exit Saving Changes Exit after writing all modified Setup item values to NVRAM.
Exit Discarding Changes Exit leaving NVRAM unmodified. User is prompted if any of the setup fields were
modified.
Load Setup Defaults Load default values for all SETUP items.
Load Custom Defaults Load values of all Setup items from previously saved Custom Defaults. NOTE:
This is hidden if custom defaults are not valid or present.
Save Custom Defaults Stores Custom Defaults in NVRAM.
Discard Changes Read previous values of all Setup items from NVRAM.
Save Changes Write all Setup item values to NVRAM.