Filter
Top Products
Regulatory and Integration Information Intel® Server Board SDS2
Revision 1.2
Order Number: A85874-002
102
12. Regulatory and Integration Information
12.1 Regulatory Compliance
The SDS2 server board complies with the following safety standard requirements.
Table 88. Safety Regulations
Regulation Title
UL 1950/CSA950 Bi-National Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (USA and Canada)
EN 60950 The Standard for Safety of Information Technology Equipment including
Electrical Business Equipment. (European Community)
IEC60 950 The Standard for Safety of Information Technology Equipment including
Electrical Business Equipment. (International)
EMKO-TSE (74-SEC) 207/94 Summary of Nordic deviations to EN 60950. (Norway, Sweden, Denmark,
and Finland)
EU Low Voltage Directive 73/23/ECC Compliance to EU Low Voltage Directive via EN60 950 / IEC 60950
The SDS2 server board has been tested and verified to comply with the following EMC
regulations when installed in a compatible Intel host system. For information on Intel compatible
host system(s), refer to Intel’s Server Builder website, or contact your local Intel representative.
Table 89. EMC Regulations
Regulation Title
FCC – Class A Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, pertaining
to unintentional radiators. (USA)
ICES-003 – Class A Interference-Causing Equipment Standard, Digital Apparatus, Class A (including
CRC c. 1374) (Canada).
CISPR 22 Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (International)
VCCI – Class A Implementation Regulations for Voluntary Control of Radio Interference by Data
Processing Equipment and Electronic Office Machines. (Japan)
EN55022 Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (Europe)
EN55024 Generic Immunity Standard;
EU EMC Directive
89/336/EEC
Compliance to EU EMC Directive via EN55022 & EN55024
BSMI (CNS13438) – Class A Taiwan EMC Regulations based on CISPR 22
C-tick (AS/NZS 3548) Australia & New Zealand EMS Regulations based on CISPR 22
The SDS2 Server Board is marked with the following regulatory markings: