Filter
Top Products
Intel® Server Board SDS2 BIOS
Revision 1.2
Order Number: A85874-002
69
5. Turn on system power.
The system boots from the recovery diskette. The BIOS will beep twice when the update
process starts. The system will continue to beep while updating the BIOS. If BIOS update
completes successfully, the system will stop beeping. If the update fails, the system will sound
an alternating pattern of a buzz and a beep.
When the flash update completes:
1. Turn off system power.
2. Remove the recovery diskette.
3. Restore the recovery jumper to its original position.
4. Turn on system power.
5. Flash any custom blocks such as user binary.
The system should now boot normally using the updated system BIOS.