Filter
Top Products
Adding or Replacing PCI/PCI-X Cards
007-4857-002 137
Figure 6-25 Replacing the IA Blade PCI Access Door
8. Replace the PCI card access door by installing it into the slotted opening and sliding it
forward, as shown in Figure 6-25.
9. Reinstall the top PCI card access door screw.
10. Reinstall the front PCI card access door screw.
11. Reinstall the IA blade in the IRU chassis.
12. Return the system to service.
13. Boot your operating system software. (See your software operation guide if you need
instructions to boot your operating system.)
14. Run the ls -pci PCI hardware inventory command to verify the installation. This
command lists PCI hardware that the operating system discovered during the boot operation.
COMPACT
COMPACT
1
2