Filter
Top Products
Unpacking and Inspecting Modules
007-4857-002 23
Firmly connect the base module of the IRU to the fan module using these steps:
1. Align the rear connectors of the fan module with the rear of the IRU base module and
carefully slide it in until it fully joins together.
2. Align the right side joining plate screw holes with the eight holes in the two adjacent
modules. See Figure 1-10 for an example.
3. Insert and tighten the eight retention screws that hold the connection plate in place.
4. Repeat the process for mounting the joining plate on the left side of the IRU.
Figure 1-10 IRU Connection Plate for Desktop Systems
COMPACT
inside
TM
COMPACT
i
n
si
de
TM