Filter
Top Products
Chapter 7: Installing SNA Server Link Services Software
iSPAN Serial WAN Adapter Users Guide 111
NOTE
If the Cards list is empty, the adapter might not be
properly installed. See Problems and Solutions on page
166 for information to correct the problem.
When configuring the adapter’s serial port properties, if you
are not sure which options to select, use the default values. You
can change the settings later. For detailed information about
setting up WAN properties, press the F1 key to view field-level
help, or see Setting up Firmware and Hardware on page 145.
To configure the WAN properties, make sure the appropriate
adapter is selected in the Cards list of the WAN Adapters
Setup dialog box. Then do the following:
1. Select the serial port you want to configure and click
Properties.
The SR Port Properties dialog box appears.
Figure 7-3. SR Port Properties Dialog Box
2. In the Interface field, select the Serial Line interface
type to be used with the adapter.