Filter
Top Products
Adding the NDIS Logical Adapter
44 Interphase Corporation
Adding the NDIS Logical Adapter
After you respond OK to the message that the driver is
running, the NDIS Driver Setup dialog box appears.
Figure 4-9. NDIS Driver Setup Dialog Box
The Adapter section of this dialog box displays the NDIS
logical adapter that is created automatically with the driver
installation. Use this dialog box after you finish the driver
installation to set up WAN transport protocols and channels for
logical adapters (as described in Setting Up Channels for
Logical Adapters on page 75.)
To continue with the driver installation, do the following:
1. Click OK to add the new logical adapter to the
operating system and close the NDIS Driver Setup
dialog box.