Filter
Top Products
Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide 69
Adding a Logical Adapter
To add a new logical adapter to the NDIS driver configuration,
do the following:
1. From the Start menu, select Settings, and then Control
Panel. Then double-click the Network icon and select
the Adapters tab to display the Network Adapters
dialog box.
2. On the Network Adapters dialog box, click the Add
button.
The Select Network Adapter dialog box appears, listing
adapter drivers.
Figure 5-2. Adding a Logical Network Adapter
3. Select Interphase 5535 NDIS Adapter, and click OK.
The NDIS Driver Setup dialog box appears.