![](http://pdfasset.owneriq.net/0/2f/02f763a7-0f6d-4ed7-9446-4bfceb2a9a4e/02f763a7-0f6d-4ed7-9446-4bfceb2a9a4e-bga5.png)
9
iSPAN Serial WAN Adapter Users Guide 145
9Setting up Firmware
and Hardware
Overview
The WAN Adapters Setup utility enables you to manage
hardware and firmware for iSPAN-Serial WAN adapters, and
make configuration changes after completing the software
installation. Use this utility to add iSPAN-Serial WAN
adapters and their firmware to the operating system. Also use
this utility to remove iSPAN-Serial WAN adapters or to make
other changes to adapter firmware and hardware properties.
The chapter explains how to do the following WAN Adapters
Setup tasks:
• Access online help
• Start the utility
• Manage adapter firmware properties, including X.25
and Frame Relay network properties
• Manage adapter hardware properties, including card
and port properties
• Save adapter firmware and hardware properties
according to your needs
NOTE
If you change any firmware, card, port, or WAN Network
properties, you must apply changes, reload the firmware,
save properties, and restart the system, as described in
Saving WAN Adapters Setup Properties on page 163.