Filter
Top Products
Firmware Management
158 Interphase Corporation
The Serial Line Properties dialog box appears.
Figure 9-8. Serial Line Properties
a. Select the serial line clock, coding, and DSR timer
values that match the parameters of your Frame
Relay provider.
b. Click OK to save the network properties and return
to the Frame Relay Protocol Properties dialog box.
6. Click OK to save the Frame Relay Protocol Properties
configuration and return to the WAN Adapters Setup
dialog box.
NOTE
If you need to remove a Frame Relay network
configuration, select the configuration in the Frame Relay
Protocol Properties dialog box and press the Delete key.
7. Save the protocol changes on the adapter by reloading
the firmware as described in Saving WAN Adapters
Setup Properties on page 163.