Filter
Top Products
Chapter 3: Connecting to the Line
iSPAN Serial WAN Adapter Users Guide 33
Connecting to the Network
WARNING
Before connecting the cable, read the Safety Precautions
section at the front of this manual.
With the adapter installed, you are ready to connect the adapter
to the network, as follows:
1. Attach the appropriate connector to the adapter.
2. Reconnect the power cable and turn on the computer.
After connecting the adapter to the network, install the adapter
software. To install NDIS software, see Installing the
NDIS Software Package on page 35. To install SNA Link
Service software, see Installing SNA Server Link Services
Software on page 107.