Filter
Top Products
WARNING: Avvertenza Per ridurre il rischio di incendio, usare solo un cavo per linea
di telecomunicazioni di sezione 0,12 mm2 (26 AWG) o maggiore.
WARNING: Advarsel Bruk kun AWG nr. 26 eller telekommunikasjonsledninger med
større dimensjon for å redusere faren for brann.
WARNING: Aviso Para reduzir o risco de incêndio, utilize apenas terminais de fio
de telecomunicações Nº. 26 AWG ou superiores.
WARNING: ¡Atención! Para reducir el riesgo de incendios, usar sólo líneas de
telecomunicaciones de calibre No. 26 AWG o más gruesas.
WARNING: Varning! För att minska brandrisken skall endast Nr. 26 AWG eller större
telekommunikationsledning användas.
Installation Safety Guidelines and Warnings
Observe the following guidelines and warnings before and during Services Router
installation:
■ Chassis Lifting Guidelines on page 263
■ Installation Instructions Warning on page 264
■ Rack-Mounting Requirements and Warnings on page 264
■ Ramp Warning on page 268
Chassis Lifting Guidelines
The weight of a fully populated chassis is approximately 15.9 lbs (7.2 kg) for a J2320
Services Router, 18.2 lbs (8.3 kg) for a J2350 Services Router, 25.3 lbs (11.5 kg) for
a J4350 Services Router, and 30.7 lb (13.9 kg) for a J6350 Services Router. Observe
the following guidelines for lifting and moving a Services Router:
■ Before moving the Services Router, read the guidelines in “Preparing for Router
Installation” on page 101 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
■ Before lifting or moving the Services Router, disconnect all external cables.
■ As when lifting any heavy object, lift most of the weight with your legs rather
than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your
footing is solid.
Safety Guidelines and Warnings ■ 263
Chapter 14: Safety and Regulatory Compliance Information