Juniper Networks J2320 Network Router User Manual


 
Figure 38: ADSL 2/2+ Annex A PIM
Figure 39: ADSL 2/2+ Annex B PIM
The ADSL PIM provides the following key features:
Onboard network processor
ADSL, ADSL2, and ADSL2+ protocols on the same PIM
Dying gasp notification
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
For pinouts of cable connectors for ADSL PIMs, see ADSL and G.SHDSL RJ-11
Connector Pinout on page 240.
To install or remove a PIM, see Replacing a PIM on page 174.
The ADSL PIMs have two LEDs to indicate the status of the PIM and its port.
Table 32 on page 65 describes the meaning of the LED states.
Table 32: LEDs for ADSL PIMs
DescriptionStateColorLabel
PIM passed the self-test and is online and
operational.
On steadilyGreen
ONLINE
PIM is offline.OffUnlit
Online with no alarms or failures.On steadilyGreen
STATUS
Active with local or remote alarms. The router
has detected a failure.
On steadilyRed
Field-Replaceable PIMs 65
Chapter 3: PIM and VoIP Module Overview