Filter
Top Products
Safety Guideline
sandWarnings
Safety Guidelines and Warnings
This section l
ists safety guidelines and warnings for installing, operating, and maintaining the
router:
• General Safety Guidelines and Warnings on page 131
• Electrical Sa
fety Guidelines and Warnings on page 135
• Installation Safety Guidelines and Warnings on page 146
• Laser an d LED Safety Guidelines and Wa rnings on page 152
• Maintenance and Operational Safety Guidelines and Warnings on page 155
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the router from d amage. The
list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
• Perform only the procedures explicitly described in this m anual. M a ke sure that only
authorized service personnel p erform other system services.
• Keep the area around the chassis clear and free from dust before, during, and after
installation.
• Keep tools away from areas where people could trip over them while walking.
• Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which
could become caught in the chassis.
• Wear safety glasses if you are working under any conditions that could be hazardous to
your eyes .
• Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
• Never a ttempt to lift an object that is too heavy for one person to handle.
• Never install or manipulate wiring during electrical storms.
• Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
• Operate the router only when it is properly grounded.
• Replace fuses only with fuses of the same type and rating.
• Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this manual. Such an action could cause severe electrical shock.
• Do not push or force any objects through any op ening in the chassis frame. Such an
action could result in electrical shock or fire.
Safety and Regulatory Compliance Information
131