Filter
Top Products
This section explains how to configure or change your network settings.
Connecting to a wireless network
To connect your printer to an 802.11 wireless (Wi-Fi) network, use the following procedures.
Before you connect
You need:
a wireless router.
to determine whether your wireless router supports Wi-Fi Protected Set-Up (WPS).
: If you have specific questions about your router, see your router manufacturer's documentation for more
information.
Connecting to a wireless network using the Wi-Fi Set-Up Wizard
You can use the Wi-Fi Set-Up Wizard on the printer to connect to your wireless network. Use the procedure that is
appropriate for your network set-up.
Connecting to a non-WPS wireless router
To connect to your wireless network, you need to know the network name, also called the Service Set Identifier
(SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more
information.
If you have enabled security on your network, you also need to know the security string, which may be a Wired
Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID):
Security String (case-sensitive): ____________________________
1. Press .
2. Touch , then touch Network Settings.
3. Touch Wi-Fi Set-Up Wizard.
: The Wi-Fi radio turns on automatically when you select Wi-Fi Set-Up Wizard.
The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then
displays the list in order of signal strength. For example:
2
Networking Your Printer
www.kodak.com/go/aiosupport 7