Filter
Top Products
Fax Setting Options Description
Print Fax Cover Page -- The Fax Cover Page shows the date and
headings for To and From information for
your fax. Use this cover page, if needed,
when sending a fax.
To print a Fax Cover Page, load letter or
A4 paper, then press .
Print Fax Activity Log -- The Fax Activity Log contains
information (date, time, duration, to/
from, number of pages and more) about
the last 30 faxes sent and/or received.
To print a Fax Activity Log, load letter or
A4 paper, then press .
Dialling Mode Tone (default) / Pulse Determines how the printer dials a fax
number.
Tone dialling (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialling, which uses a series
of pulses to dial a phone number.
Traditionally, pulse dialling was used by
rotary phones; tone dialling is used by
touch-tone phones.
Error Correction On (default) / Off Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can
occur on poor-quality phone lines.
Error correction increases the sending
time on poor-quality phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
If you are using Vonage or Magic Jack,
we recommend that you set Error
Correction to OFF.
To adjust fax settings from the Online Printer Management Tool:
1. Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 16).
2. Select the Settings tab, then select Fax > Settings.
3. Change the Sender Information and/or fax Settings as needed.
4. Click Save to update the settings.
Setting the answer mode (auto answer or manual)
The default setting for Auto-Answer is on. When Auto-Answer is on, the printer picks up all incoming faxes
automatically.
To answer calls manually, touch Answer now on the LCD or turn off Auto-Answer (see also Receiving a fax manually ,
74):
1. Press .
2. Touch , then touch Fax.
KODAK HERO 4.2 All-in-One Printer
www.kodak.com/go/aiosupport 69