Filter
Top Products
2. Close the lid.
3. Press .
4. Touch Scan.
5. Touch Computer, then touch the setting/option you want to change.
Scan Option Settings Description
Scan To USB-connected Computer (default) The scanned file is sent to the USB-
connected computer.
Name of computer (only if a computer
is connected by wireless or Ethernet
network)
The scanned file is sent to the computer
on the wireless or Ethernet network.
Scan What Document (default) Sets the scan settings for scanning a
document (see Changing the scan
settings for scanning from the control
panel, 55).
Photo Sets the scan settings for scanning a
picture (see Changing the scan settings
for scanning from the control panel,
55).
Scan Action Save to File (default) Sends the scanned file in the format and
to the location on your computer that
you designate.
Open with Application (available only
when Home Centre Software is
installed on computer)
Sends the scanned file to Home Centre
Software.
Save as Defaults No / Yes To save the settings as the new default,
press Yes.
6. Press to begin scanning.
The scanned file appears at the destination you specified.
7. When the message "Scan complete" appears, touch OK.
Scanning
58 www.kodak.com/go/aiosupport