Konica Minolta 7135 Printer User Manual


 
1-5
1
Safety
Information
Requirements for Safe Use
To ensure your safe use of the machine, you are required to observe the following
precautions without fail for the machine’s power source and during installation and
routine handling. Be sure to read and observe them.
Power Source
CAUTION: Plug Socket
A socket is limited in capacity. Use only a power source with the correct rating for
the machine; otherwise, hazardous situations such as smoking or overheating may
occur.
Avoid multiple connections in the same outlet. Do not use multiple outlet adaptors.
CAUTION: Power Plug and Cord
Be sure to insert the power plug firmly into the power socket. Otherwise an accident
may occur as a result of smoking or overheating. If the inserted power plug is loose
in the socket, even after it has been positively inserted, disconnect the plug and
contact your electrical contractor.
For plug cable equipment, the outlet must be near the equipment and easily
accessible.
Do not bend or crush the power cord. If your copier power cord is bent or damaged
in any way, contact your service representative immediately. Do not attempt to repair
it yourself, and do not continue to operate the copier. A damaged power cord may
result in overheating, short circuit, or fire.
Do not bundle or coil the power cord of the copier. Otherwise an accident may occur
as a result of overheating or fire.
CAUTION: Connecting Multiple Loads to One Outlet Prohibited
Never connect multiple loads to one outlet using a multi-outlet extension cord or
branched socket. Otherwise an accident may occur as a result of overheating or fire.
CAUTION: Extension Cord
An extension cord must never be used with this machine.