Filter
Top Products
[2] Copier Initial (continued)
11-9
[2] Density
Set Copy density to be effective after power on or after Auto/Reset occurs.
❒ Setting options: AES; manual
❒ Default setting: AES on
Key Operator Mode Screen Copier Initial Setting Screen
Copy Density Initial Setting Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 2.
Density to display the Copy Density Initial Setting Screen.
2 Touch AES to select AES mode, or touch the density level required.
Nine exposure levels are displayed.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode