Filter
Top Products
Stapling Output Copies (Staple) (continued)
3-40
FS-114:
Select the desired output tray in the EXIT area.
The Saddle Tray key appears when SK-114 Saddle kit is installed, however it
cannot be used for the output tray in the Staple mode.
Touch STAPLE twice to display the Staple Position Selection popup menu.
Select the desired staple position, then touch OK to restore the Output Mode popup
menu.
4. Touch OK to restore the Basic Screen.
The selected staple position icon will be displayed in the OUTPUT icon area.
5. Select additional copy conditions, as desired.
6. Enter the desired print quantity from the control panel keypad.
See p. 10-3 to be sure that the finisher capacity is not exceeded.
7. Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
8. Press [START].
Press [STOP] to suspend the scanning or printing job.