Konica Minolta 7222 Printer User Manual


 
vii
Features of the 7222/7228/7235
AES - Automatic Exposure Selection
Automatically adjusts exposure to compensate for quality of the original.
AMS - Automatic Magnification Selection
Automatically selects an appropriate magnification ratio when Copy Size is selected
manually.
APS - Automatic Paper Selection
Automatically selects copy paper size to match the original documents.
ATS - Automatic Tray Switching
Automatically switches tray to allow printing and copying to continue without interruption if
the selected tray empties while printing and copying is in progress.
Auto Layout
The original image on the platen glass or in the document feeder is copied and centered
on a sheet.
Auto Low Power
Automatically lowers the power after a specified period of system inactivity.
Auto Reset
Automatically resets to auto mode defaults after a specified period of system inactivity.
Auto Shut-Off
Automatically shuts off the main power after a specified period of system inactivity.
Book Copy
Copies both pages of an open book or book-size sheet separately onto two letter sheets in
11 mode or separately onto each side of one letter sheet in 12 mode. You can use the
Book Copy mode with the Front or Front/Back cover mode. The cover page(s) will be
scanned and copied normally before image division is performed on the other pages.
•Booklet
Creates letter R or ledger size booklets from letter size originals in 12 or 22 copy
mode.
•Chapter
Starts chapter pages on the right side (front pages) of the finished document. Only duplex
mode (12 or 22) is compatible with this feature.
Combination
Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to save paper
while creating a draft copy of your document.
•Copy Density
Manually selects up to 9 density levels.