Filter
Top Products
Making Double-Sided Copies (12, 22) (continued)
3-19
2. Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
3. Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
4. Position originals FACE UP in the document feeder.
• See p. 3-2 to p. 3-4 for details on positioning originals.
• Use RADF store mode (p. 3-26 to p. 3-27) when the original count exceeds
50.
5. Press [START].
The machine scans originals, then prints duplex copies when they are ready for output.
Press [STOP] to suspend the scanning or printing job.
When the finisher / paper exit / inner tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray