Filter
Top Products
Positioning Originals (continued)
3-3
Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
To use the Mixed original mode, see procedure on p. 8-4 to p. 8-5.
1. Arrange originals in order.
Arrange the mixed size originals as illustrated below.
• Before placing originals in the tray, be sure the document feeder is fully
closed. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
• Be sure not to use unsuitable RADF originals. See p. 10-7 for details.
See p. 10-8 for allowable combinations of mixed originals.
2. Position mixed originals FACE UP, aligned with the left rear side of the
document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
3. Adjust paper guides.
Setting
direction
To the
depth
To the left
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray